Next steps
1. Reconnect the battery
2. Replace the base cover
3. Replace the SD memory card
4. Follow the procedure in after working inside your computer
VGA daughterboard
Removing the VGA daughterboard
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SD memory card.
3. Remove the base cover.
4. Disconnect the battery.
Steps
1. Disconnect the VGA daughterboard cable from the system board [1].
2. Unroute the VGA board cable from the routing guides on the fan [2].
72
Removing and installing components
To Next Page
Loading...
