Table 2. Antenna-cable color scheme
Connectors on the WLAN card Antenna-cable color
Auxiliary (black triangle) Black
2. Align the notch on the WLAN card with the tab on the WLAN-card slot.
3. Slide the WLAN card at an angle into the WLAN-card slot.
4. Place the WLAN-card bracket on the WLAN card.
5. Tighten the captive screw to secure the WLAN-card bracket to the WLAN card.
Next steps
1. Install the base cover.
2. Install the microSD card.
3. Install the SIM card.
4. Follow the procedure in after working inside your computer.
WWAN card
Removing the WWAN card
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SIM card.
3. Remove the microSD card.
4. Remove the base cover.
About this task
The following image indicates the location of the WWAN card and provide a visual representation of the removal procedure.
Removing and installing components
23
To Next Page
Loading...
