About this task
The following images indicate the location of the infrared camera module and provide a visual representation of the removal
procedure.
Steps
1. Peel the two conductive tapes that secure the camera/microphone module in place.
2. Disconnect the camera/microphone cable from the connector on the camera/microphone module.
3. Carefully lift the camera/microphone module from the display back cover.
Installing the infrared camera module
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the infrared camera module and provides a visual representation of the installation
procedure.
94
Removing and installing components
To Next Page
Loading...
