Steps
1. Disconnect the battery cable from the system board, if it was not disconnected earlier.
2. Loosen the three captive screws that secure the battery to the palm-rest assembly.
3. Lift the battery off the palm-rest assembly.
Removing the 3-cell battery filler
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the SIM card.
3. Remove the microSD card.
4. Remove the base cover.
5. Remove the 3-cell battery.
About this task
The following images indicate the location of the 3-cell battery filler and provide a visual representation of the removal
procedure.
38
Removing and installing components
To Next Page
Loading...
