Steps
1. Align the tab holes on the battery filler with the tabs on the 3-cell battery.
2. Slide the battery filler into the 3-cell battery until it locks in place.
Next steps
1. Install the 3-cell battery.
2. Install the base cover.
3. Install the microSD card.
4. Install the SIM card.
5. Follow the procedure in after working inside your computer.
Installing the 3-cell battery
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the 3-cell battery and provides a visual representation of the installation procedure.
40
Removing and installing components
To Next Page
Loading...
