Figure 3. M.2 2280 solid-state drive without bracket
Figure 4. M.2 2280 solid-state drive with bracket
Steps
1. Installing M.2 2280 solid-state drive without bracket:
a. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
b. Slide the M.2 2280 solid-state drive at an angle into its slot on the system board.
c. Replace the (M2x4) screw to secure the M.2 2280 solid-state drive to the system board.
2. Installing M.2 2280 solid-state drive with bracket:
a. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
b. Slide the M.2 2280 solid-state drive at an angle into its slot on the system board.
Removing and installing components
29
To Next Page
Loading...
