Dell Latitude 7280 - System Configuration Screen Options

Option Description
Battery
Information
Displays the battery status health and whether the AC adapter is installed.
Boot Sequence Allows you to change the order in which the computer attempts to find an operating system.
● Diskette Drive
● Internal HDD
● USB Storage Device
● CD/DVD/CD-RW Drive
● Onboard NIC
Boot sequence
options
● Windows boot manager
● WindowsIns
Boot list options
● Legacy
● UEFI—selected by default
Advanced Boot
Options
This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is
disabled. Enable Attempt Legacy Boot is disabled by default.
UEFI boot path
security
● Always, except internal HDD
● Always
● Never
Date/Time Allows you to change the date and time.
System Configuration screen options
Option
Description
Integrated NIC Allows you to configure the integrated network controller. The options are:
● Disabled
● Enabled
● Enable UEFI network stack: This option is enabled by default.
● Enabled w/PXE
Parallel Port Allows you to configure the parallel port on the docking station. The options are:
● Disabled
● AT: This option is enabled by default.
● PS2
● ECP
Serial Port Allows you to configure the integrated serial port. The options are:
● Disabled
● COM1: This option is enabled by default.
● COM2
● COM3
● COM4
SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are:
● Disabled
● AHCI
● RAID On: This option is enabled by default.
Drives Allows you to configure the SATA drives on board. All drives are enabled by default. The options are:
● SATA-0
● M.2 PCI-e SSD-0
● SATA-2
SMART
Reporting
This field controls whether hard drive errors for integrated drives are reported during system startup. This
technology is part of the SMART (Self-Monitoring Analysis and Reporting Technology) specification. This
option is disabled by default.
58 System Setup