EasyManua.ls Logo

Dell Latitude 7280 - Security screen options

Dell Latitude 7280
77 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Option Description
30 sec
1 min
5 min
15 min
Never
Touchscreen It controls whether the screen is enabled or disabled. This option is enabled by default.
Unobtrusive
Mode
This option, when enabled, pressing Fn+F7 turns off all light and sound emissions in the system. To
resume normal operation, press Fn+F7 again. This option is disabled by default.
Miscellaneous
Devices
Allows you to enable or disable the following devices:
Enable Cameraenabled by default
Secure Digital (SD) cardenabled by default
Secure Digital (SD) card boot
Secure Digital (SD) card read-only-mode
Video
Option
Description
LCD Brightness Allows you to set the display brightness depending up on the power sourceOn Battery and On AC. The
LCD brightness is independent for battery and AC adapter. It can be set using the slider.
NOTE: The video setting is visible only when a video card is installed into the system.
Security screen options
Option
Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
NOTE: You must set the admin password before you set the system or hard drive password. Deleting
the admin password automatically deletes the system password and the hard drive password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set
System
Password
Allows you to set, change, or delete the system password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set
Internal HDD-2
Password
Allows you to set, change, or delete the administrator password.
NOTE: Successful password changes take effect immediately.
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
NOTE: If Strong Password is enabled, the Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
Password
Configuration
Allows you to specify the minimum and max password lengths of the Administrator and System
passwords.
min-4by default, if you want to change you can increase the number
60 System Setup

Table of Contents

Related product manuals