Dell MD1420 Hardware Owner's Manual

Front-bezel features and indicators
Figure 2. Front-bezel features and indicators
Item Indicator, Button, or
Connector
Icon Description
1 Enclosure status LED The enclosure status LED lights when the enclosure power is on.
Lights solid blue during normal operation.
Blinks blue when a host server is identifying the enclosure or when the
system identification button is pressed.
Blinks amber or remains solid amber for a few seconds and then turns off
when the EMMs are booting or resetting.
Blinks amber for an extended time when the enclosure is in a warning
state.
Remains solid amber when the enclosure is in the fault state.
2 Power LED The power LED lights when at least one power supply unit (PSU) is
supplying power to the enclosure.
3 Latch The latch is used to remove the bezel from the enclosure.
6 About your enclosure

Dell MD1420 Specifications

General

Form Factor	2U Rack-Mountable
Interface	12Gbps SAS
Hot-Swap Bays	Yes
Drive Bays	24 x 2.5"
Maximum Capacity	Up to 192TB
RAID Support	Depends on controller
Power Supply	Redundant power supplies
Cooling	Redundant cooling fans
Product Type	Storage Enclosure
Number of Controllers	0 (JBOD)
Compatibility	Dell PowerEdge servers