Dell Networking N4032 - 2.4.2 Web Interface Method


54
To access the switch through any Management Interface
you can
. Setup the IP address for the Management Interface.
. Setup the default gateway if IP address is manually
congured on both routing and OOB interface.
Would you like to setup the Out-Of-Band interface
now? [Y/N] y
Please enter the IP address of the device (A.B.C.D)
or enter “DHCP” (without the quotes) to automatically
request an IP address from the network DHCP server.
[192.168.2.1]:
Please enter the IP subnet mask (A.B.C.D or /nn).
[255.255.255.0]:
This is the conguration information that has been
collected:
User Account setup = root
Password = ********
Out-of-band IP address = 192.168.2.1 255.255.255.0
Final Step:
If the information is correct, please enter (Y) to
save the conguration, and copy the settings to the
start-up conguration le. If the information is
incorrect, enter (N) to discard the conguration and
restart the wizard: [Y/N] y
Thank you for using the Dell Easy Set up Wizard. You
will now enter CLI mode.
Applying Interface conguration, please wait...
console>