Dell Networking N4032 - Page 35


52



IP

•.SNMP


•

•.IPOOB

Enter



POST
(Unit 1-Waiting to select management unit)>
Applying Global conguration, please wait...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial
switch conguration, and gets you up and running as
quickly as possible. You can skip the setup wizard,
and enter CLI mode to manually congure the switch.
You must respond to the next question to run the
setup wizard within 60 seconds, otherwise the system
will continue with normal operation using the default
system conguration. Note: You can exit the setup
wizard at any point by entering [ctrl+z].
Would you like to run the setup wizard (you must
answer this question within 60 seconds)? [Y/N] y