Dell Networking N4032 User Manual

18 Stacking Dell Networking Switches: N4032, N4032F, N4064, N4064F
Select a switch to be Master of the stack and for managing all ports and member units with the stack.
Login to the Web UI for this switch by entering the IP address of the switch into a supported Web browser.
A username and password is required and should be setup beforehand on each switch. See the switch
User Guide for more information regarding username, password, and Web access.
After login, the first screen to appear is the Home screen, which shows the current stacking member
number. Before stacking, the single member has the Stack number of 1 (one).

Dell Networking N4032 Specifications

General

Rack Units	1U
Layer	Layer 3
Manageable	Yes
Stackable	Yes
MAC Address Table Size	32, 000 entries
Jumbo Frame Support	Yes
Jumbo Frame Size	9216 bytes
Input Voltage	100-240 VAC
Operating Temperature	0°C to 45°C (32°F to 113°F)
Uplink Ports	8 x 10 Gigabit Ethernet 10GBASE-T
Power Supply	Dual, hot-swappable
Operating Humidity	10% to 90% non-condensing