What to do if my Dell Desktop displays 'MEMORY ODD/EVEN LOGIC FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE'?
K
krista36Sep 2, 2025
If your Dell Desktop displays 'MEMORY ODD/EVEN LOGIC FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE', a memory module may be faulty or improperly seated. Reinstall the memory module or, if necessary, replace it.
J
Jared RogersSep 15, 2025
What to do if my Dell Desktop says 'INVALID CONFIGURATION INFORMATION-PLEASE RUN SYSTEM SETUP PROGRAM'?
M
Mr. Robert Simmons Jr.Sep 15, 2025
If your Dell Desktop displays 'INVALID CONFIGURATION INFORMATION-PLEASE RUN SYSTEM SETUP PROGRAM', correct the appropriate options in the system setup program.
K
Kelsey AndersonAug 31, 2025
What to do if my Dell OptiPlex 3060 Tower Desktop displays 'MEMORY ADDRESS LINE FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE'?
D
Desiree ChoiAug 31, 2025
If your Dell Desktop displays 'MEMORY ADDRESS LINE FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE', a memory module may be faulty or improperly seated. Reinstall the memory module or, if necessary, replace it.
S
Sheila GreenSep 18, 2025
How to fix 'KEYBOARD DATA LINE FAILURE' on a Dell OptiPlex 3060 Tower Desktop?
Z
zlopezSep 18, 2025
To fix a 'KEYBOARD DATA LINE FAILURE' on a Dell Desktop, for external keyboards, check the cable connection. Run the Keyboard Controller test in Dell Diagnostics.
M
mindybarrettSep 17, 2025
How to fix 'KEYBOARD CONTROLLER FAILURE' on a Dell OptiPlex 3060 Tower?
C
Christine EwingSep 17, 2025
To fix a 'KEYBOARD CONTROLLER FAILURE' on a Dell Desktop, for external keyboards, check the cable connection. Restart the computer, and avoid touching the keyboard or the mouse during the boot routine. Run the Keyboard Controller test in Dell Diagnostics.
S
shepherdrachelSep 23, 2025
What does 'MEMORY ALLOCATION ERROR' mean on my Dell OptiPlex 3060 Tower?
B
brownearlSep 23, 2025
The software you are attempting to run is conflicting with the operating system, another program, or a utility. Shut down the computer, wait for 30 seconds, and then restart it. Run the program again. If the error message still appears, see the software documentation.
W
William FrenchAug 28, 2025
What does 'GENERAL FAILURE' mean on Dell Desktop?
S
susan57Aug 28, 2025
If your Dell Desktop displays a 'GENERAL FAILURE' message, it means the operating system is unable to carry out the command. This message is usually followed by specific information. For example, Printer out of paper. Take the appropriate action.
R
robert82Aug 27, 2025
What to do if my Dell Desktop says 'DECREASING AVAILABLE MEMORY'?
R
Randy FoxAug 27, 2025
If your Dell Desktop indicates 'DECREASING AVAILABLE MEMORY', it means that one or more memory modules may be faulty or improperly seated. Reinstall the memory modules or, if necessary, replace them.
J
jordankathleenAug 26, 2025
What to do if my Dell OptiPlex 3060 Tower Desktop says 'HARD-DISK DRIVE READ FAILURE'?
J
Joshua BurchAug 27, 2025
If your Dell Desktop displays 'HARD-DISK DRIVE READ FAILURE', shut down the computer, remove the hard drive, and boot the computer from an optical. Then, shut down the computer, reinstall the hard drive, and restart the computer. If the problem persists, try another drive. Run the Hard Disk Drive tests in Dell Diagnostics.
G
Garrett MorganAug 25, 2025
What does 'Keyboard failure' mean on my Dell OptiPlex 3060 Tower and how to fix it?
W
whitneysheltonAug 26, 2025
A 'Keyboard failure' message on your Dell Desktop indicates a keyboard failure or a loose cable. Reseat the cable; if that doesn't solve the problem, replace the keyboard.
Dell OptiPlex 3060 Tower Specifications
General
Operating System
Windows 10 Pro
Form Factor
Tower
Processor
Intel Core i3/i5/i7
RAM
Up to 32GB DDR4
Storage
HDD/SSD up to 1TB
Graphics
Intel UHD Graphics 630
Ports (Front)
2 x USB 3.1, 2 x USB 2.0, 1 x headphone/mic combo
Ports (Rear)
4 x USB 3.1, 2 x USB 2.0, 1 x HDMI, 1 x RJ-45
Expansion Slots
1 x PCIe x16, 1 x PCIe x1
Power Supply
260W
Optical Drive
Optional DVD+/-RW
Ports
Front: 2 x USB 3.1 Gen 1, 1 x headphone/microphone combo jack; Rear: 4 x USB 3.1 Gen 1, 2 x USB 2.0, 1 x HDMI, 1 x VGA, 1 x serial port, 1 x RJ-45, 1 x line-out, 1 x line-in