b) Connect the cable to the display assembly base.[2].
2. Install the following components:
a) Display panel
b) Antennas
c) Headset port
d) I/O board
e) Microphones
f) Power button board
g) Speakers
h) System board
i) I/O bracket
j) PSU fan
k) PSU
l) Base cover
m) Camera
n) System fan
o) WLAN card
p) System board shield
q) Hard drive
r) Back cover
s) Stand
3. Follow the procedure in After working inside your computer.
Middle frame
Removing the middle frame
1. Follow the procedure in Before working inside your computer.
Removing and Installing components
99
To Next Page
Loading...
