Dell OptiPlex 7440 - Removing the VESA Mount Bracket; Installing the VESA Mount Bracket

7. Install the:
a. system-board shield
b. speaker cover
c. cable cover
d. back cover
e. stand
8. Follow the procedure in After Working Inside Your Computer.
Removing the VESA mount bracket
1. Follow the procedure in Before Working Inside Your Computer.
2. Remove the:
a. stand
b. back cover
c. system-board shield
d. power-supply unit
3. Perform the following steps as shown in the illustration:
a. Remove the screws that secure the VESA mount bracket to the computer [1].
b. Lift the bracket away from the computer [2].
Installing the VESA mount bracket
1. Align and place the bracket in the slot on the computer.
2. Tighten the screws that secure the VESA mount bracket to the computer.
3. Install the:
a. power-supply unit
b. system-board shield
c. back cover
d. stand
24