Dell OptiPlex 7440 - Cloud Desktop Screen Options

Option Description
Follow the procedure to recover BIOS from hard drive.
1. Power on the system.
2. While the blue Dell logo is visible, press the F2 key to enter the System Setup.
3. Press the Num Lock key, and verify that the Num Lock light is on.
4. Press the Caps Lock key, and verify that the Caps Lock light is on.
5. Press the Scroll Lock key, and verify that the Scroll Lock light is on.
6. Press the Alt + F keys at the same time. The system will beep as the setup
defaults are restored.
7. Press the Alt + F keys at the same time to restart the system. The changes are
automatically saved.
Cloud desktop screen options
Option Description
Server Lookup
Method
This option specifies how the Cloud Desktop software will lookup the server
address. The options are:
• Static IP - Uses the static IP address
• DNS - Obtains several IP addresses using the Domain Name System (DNS)
protocol. This option is selected by default
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.
Server Name This option specifies the server name of the server.
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop, and when
the server look up method is set to DNS.
Server IP Address This option specifies the primary static IP address of the Cloud Desktop Server with
which the client software communicates. The default Server IP Address is
255.255.255.255
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.
Server Port This option specifies the primary IP port of the Cloud Desktop with which the client
software communicates. The default Server Port value is 06910.
NOTE: This option is relevant only when the Integrated NIC control in the
System Configuration group is set to Enable with Cloud Desktop.
Client Address
Method
This option specifies how the client obtains its IP address. The options are:
• Static IP - Uses the static IP address
49