Dell OptiPlex 7440 - Page 37

4. Align all the cables through their retention clips on the display panel.
5. Tighten the screws to secure the latches to the computer.
6. Install the:
a. system board
b. speakers
c. processor fan
d. heatsink
e. power-supply unit
f. converter board
g. power and OSD buttons board
h. intrusion switch
i. hard drive
j. optical drive
k. WLAN card
l. system-board shield
m. VESA mount bracket
n. speaker cover
o. cable cover
p. back cover
q. stand
7. Follow the procedure in After Working Inside Your Computer.
37