EasyManua.ls Logo

Dell OptiPlex 760 - Installing a Speaker; Removing a Speaker

Dell OptiPlex 760
203 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Back to Contents Page
Dell™OptiPlex™760ServiceManual
Speakers
Speakers
Installing a Speaker
1. Follow the procedures in Working on Your Computer.
2. Remove the cover of your computer (see Removing the Computer Cover).
3. Insert the speaker into the chassis of the computer.
4. Connect the cables to the system board.
5. Replace the computer cover.
6. Turn on power to the computer.
Removing a Speaker
1. Follow the procedures in Working on Your Computer.
2. Remove the cover of your computer (see Removing the Computer Cover).
3. Disconnect the cables from the system board.
4. Remove the speaker from the chassis of the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

Table of Contents

Other manuals for Dell OptiPlex 760

Related product manuals