Table 27. System setup options—Integrated Devices menu
Integrated Devices
Date/Time Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Camera Enables or disable the camera.
By default, the Enable Camera option is selected
Audio
Enable Audio Enable or disable the integrated audio controller.
By default, all the options are enabled.
USB Configuration Enable or disable booting from USB mass storage devices through the boot
sequence or boot menu.
By default, all the options are enabled.
Side USB Configuration Enable or disable the individual side USB ports.
By default, the Side USB Port 1 (Bottom) and Side USB Port 2
(Top)option are enabled.
NOTE: Despite the description shown in the BIOS Side USB Port 1
(Bottom) refers to the USB port on the right side view of the computer
and Side USB Port 2 (Top) refers to the USB port on the bottom view of
the computer.
Rear USB Configuration Enable or disable the individual rear USB ports.
By default, all the options are enabled.
Table 28. System setup options—Storage menu
Storage
SATA Operation Enable or disable the operating mode of the integrated SATA hard drive
controller.
By default, the RAID On option is enabled.
Storage Interface
Port Enablement Enable or disable the onboard drives.
By default, SATA HDD, M.2 PCIe SSD-0, and M.2 PCIe SSD-1 options are
enabled.
SMART Reporting
Enable SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the Enable SMART Reporting option is not enabled.
Drive Information
SATA HDD
Type Displays the SATA HDD type information of the computer.
Device Displays the SATA HDD device information of the computer.
M.2 PCIe SSD-0
Type Displays the M.2 PCIe SSD-0 type information of the computer.
Device Displays the M.2 PCIe SSD-0 device information of the computer.
M.2 PCIe SSD-1
Type Displays the M.2 PCIe SSD-1 type information of the computer.
114 BIOS Setup
To Next Page
Loading...
