Removing and installing Customer
Replaceable Units (CRUs)
The replaceable components in this chapter are Customer Replaceable Units (CRUs).
CAUTION: Customers can replace only the Customer Replaceable Units (CRUs) following the safety precautions
and replacement procedures.
NOTE: The images in this document may differ from your computer depending on the configuration you ordered.
Stand
Removing the stand
Prerequisites
1. Follow the procedure in Before working inside your computer.
About this task
NOTE: Depending on the stand installed on your computer, refer to the corresponding image shown in the procedure.
The following images indicate the location of the stand and provide a visual representation of the removal procedure.
Figure 15. Removing the Height Adjustable Stand (HAS)
5
40 Removing and installing Customer Replaceable Units (CRUs)
To Next Page
Loading...
