ComfortView Plus
ComfortView Plus is a built-in, always-on, and virtually unnoticeable low blue light solution for Dell displays. ComfortView Plus
employs a hardware-based design that allows for a wider blue spectrum, with a much lower peak and reduced intensity. Dell
ComfortView Plus has been certified by TÜV Rheinland as a low blue light hardware solution. This feature is enabled at the
factory.
NOTE: ComfortView Plus is an optional hardware feature to be configured at the point of sale.
To reduce the risk of eye strain, it is also recommended that you:
●
Position the display at a comfortable viewing distance between 20 in. to 28 in. (50 cm and 70 cm) from your eyes.
● Blink frequently to moisten your eyes, wet your eyes with water, or apply suitable eye drops.
● Look away from your display, and gaze at a distant object at 20 ft (609.60 cm) away for at least 20 seconds during each
break.
● Take an extended break for 20 minutes every two hours.
GPU—Integrated
The following table lists the specifications of the integrated Graphics Processing Unit (GPU) supported by your OptiPlex
All-in-One Plus 7420.
Table 17. GPU—Integrated
Controller External display support Memory size Processor
Intel UHD Graphics 730
● One DisplayPort++ 1.4a
port (5120 x 3200 at 60
Hz)
● One HDMI-out 2.1 port
(4096 x 2160 at 60 Hz)
Shared system memory Intel Core i3
Intel UHD Graphics 770
● One DisplayPort++ 1.4a
port (5120 x 3200 at 60
Hz)
● One HDMI-out 2.1 port
(4096 x 2160 at 60 Hz)
Shared system memory Intel Core i5 vPro/i7 vPro/i9
vPro
GPU—Discrete
The following table lists the specifications of the discrete Graphics Processing Unit (GPU) supported by your OptiPlex All-in-
One Plus 7420.
Table 18.
GPU—Discrete
Controller External display support Memory size Memory type
AMD Radeon RX 6500
● One DisplayPort++ 1.4a
port (5120 x 3200 at 60
Hz)
● One HDMI-out 2.1 port
(4096 x 2160 at 60 Hz)
4 GB GDDR6
Specifications of OptiPlex All-in-One Plus 7420 29