Dell OptiPlex All-in-One Plus 7420 - Set up your computer; Installing the Computer Stand

Set up your computer
Steps
1. Install the stand base on the stand.
NOTE: Stand base installation for all stand configurations offered for your computer is exactly the same. Follow the
procedure shown in the image to install the stand base on the stand.
Figure 10. Installing the stand base
2. Set up the stand by inserting it into the slot on the back cover until it snaps into place.
NOTE:
Stand installation for all stand configurations offered for your computer is exactly the same. Follow the
procedure shown in the image to install the stand on your computer.
2
Set up your computer 15