Dell OptiPlex Micro 7020 - Page 86

Table 26. System setup options—Boot Configuration menu(continued)
Boot Configuration
By default, the PK option is selected.
Table 27. System setup options—Integrated Devices menu
Integrated Devices
Date/Time Displays the current date in MM/DD/YYYY format and current time in
HH:MM:SS AM/PM format.
Enable Audio Enable or disable the integrated audio controller.
By default, all the options are enabled.
USB Configuration Enable or disable booting from USB mass storage devices through the boot
sequence or boot menu.
By default, all the options are enabled.
Front USB Configuration Enable or disable the individual front USB ports.
By default, all the options are enabled.
Rear USB Configuration Enable or disable the individual rear USB ports.
By default, all the options are enabled.
Dust Filter Maintenance Enable or disable the dust filter maintenance.
By default, the Disabled option is enabled.
Table 28. System setup options—Storage menu
Storage
SATA/NVMe Operation Enable or disable the operating mode of the integrated SATA hard drive
controller.
By default, the RAID On option is enabled.
Storage Interface
Port Enablement Enable or disable the onboard drives.
By default, all the onboard drives are enabled.
M.2 PCIe SSD-0 Enable or disable the M.2 PCIe SSD-0 solid-state drive.
By default, the On option is enabled.
M.2 PCIe SSD-1 Enable or disable the M.2 PCIe SSD-1 solid-state drive.
By default, the On option is enabled.
SMART Reporting
Enable SMART Reporting Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during computer startup.
By default, the OFF option is disabled.
Drive Information
M.2 PCIe SSD-0
Type Displays the M.2 PCIe SSD-0 type information of the computer.
Device Displays the M.2 PCIe SSD-0 device information of the computer.
Drive Information
M.2 PCIe SSD-1
86 BIOS Setup