Table 29. System setup optionsāIntegrated devices (continued)
Integrated Devices
Dust Filter Maintenance The disabled option is enabled by default.
Table 30. System setup optionsāStorage
Storage
SATA/NVMe Operation The option RAID on is enabled by default.
Storage Interface All options are enabled by default.
SMART Reporting This option is disabled by default.
Drive information Displays drive information about this computer.
Enable MediaCard The option Secure Digital SD card is enabled by default.
Table 31. System setup optionsāDisplay
Display
Multi-Display This option is enabled by default.
Primary display
The auto option is enabled by default.
Full screen logo
This option is disabled by default.
Table 32. System setup optionsāConnection
Connection
Network Controller Configuration
Integrated NIC The option Enabled with PXE is enabled by default.
Wireless Device Enable WLAN and Bluetooth options are enabled by default.
Enable UEFI Network Stack The option Auto Enabled is enabled by default.
HTTP(s) Boot Feature The option is enabled by default.
HTTP(s) Boot Mode The Auto Mode option is enabled by default.
Table 33. System setup optionsāPower
Power
USB PowerShare This option is disabled by default.
USB Wake Support The option is enabled by default.
AC Behavior The Power Off option is enabled by default.
Active State Power Management The option Auto is enabled by default.
Block Sleep The option is disabled by default.
Deep Sleep Control The option Enabled in S4 and S5 is enabled by default.
Fan Control Override This option is disabled by default.
Intel Speed Shift Technology This option is enabled by default.
Table 34. System setup optionsāSecurity
Security
TPM 2.0 Security The option is enabled by default.
Attestation Enable This option is enabled by default.
Key Storage Enable This option is enabled by default.
BIOS setup 113