Table 37. System setup optionsāSystem Management menu (continued)
System Management
Auto on Time Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
By default, the option is disabled.
SERR Messages Enable or disable SERR messages.
By default, the option is enabled.
First Power On Date The Set Ownership Date is disabled by default.
Diagnostics The option OS Agent Requests
Power-on-Self-Test Automatic Recovery The option is enabled by default.
Table 38. System setup optionsāKeyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection Enable or disable the keyboard error detection.
By default, the option is enabled.
Numlock LED
Enable Numlock LED Enable or disable Numlock LED.
By default, the option is enabled.
Device Configuration Hotkey Access
Device Configuration Hotkey Access Enable or disable users to access device configuration by using hotkeys.
By default, the option is enabled.
Table 39. System setup optionsāPre-boot Behavior menu
Pre-boot Behavior
Warning and Errors Enable or disable the action to be done when a warning or error is encountered.
By default, the Prompt on Warnings and Errors option is enabled.
Fastboot Enable to set the speed of the boot process.
By default, the option is enabled.
Extend BIOS POST Time Set the BIOS POST time.
By default, the 0 seconds option is enabled.
Table 40. System setup optionsāVirtualization menu
Virtualization
Intel Virtualization Technology
Enable Intel Virtualization Technology
(VT)
Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities that are provided by Intel Virtualization Technology.
By default, the option is enabled.
VT for Direct I/O Specify whether a Virtual Machine Monitor (VMM) can utilize the additional
hardware capabilities that are provided by Intel Virtualization Technology for
Direct I/O.
By default, the option is enabled.
116 BIOS setup
To Next Page
Loading...
