Next steps
1. Install the display assembly.
2. Install the wireless card.
3. Install the base cover.
4. Install the SD card.
5. Follow the procedure in After working inside your computer.
Display bezel
Removing the display bezel
CAUTION: The information in this section is intended for authorized service technicians only.
NOTE: This procedure is applicable for systems shipped with a plastic chassis only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SD card.
3. Remove the base cover.
4. Remove the wireless card.
5. Remove the display assembly.
6. Remove the hinge caps.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the removal procedure.
94
Removing and installing Field Replaceable Units (FRUs)
95 / 156 94 / 154 95 / 156
To Next Page
Loading...
