Dell P112F - Edp Cable; Removing the Edp Cable

eDP cable
Removing the eDP cable
CAUTION: The information in this section is intended for authorized service technicians only.
NOTE: This procedure is applicable for systems shipped with a plastic chassis only.
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the SD card.
3. Remove the base cover.
4. Remove the wireless card.
5. Remove the display assembly.
6. Remove the hinge caps.
7. Remove the display bezel.
8. Remove the hinges.
9. Remove the display panel.
About this task
The following image indicates the location of the eDP cable and provides a visual representation of the removal procedure.
Removing and installing Field Replaceable Units (FRUs)
113
114 / 156 113 / 154 114 / 156