Steps
Align the display bezel with the display back-cover and antenna assembly, and gently snap the display bezel into place.
Next steps
1. Install the display assembly.
2. Install the WLAN card.
3. Install the battery.
4. Install the base cover.
5. Follow the procedure in After working inside your computer.
Display panel
Removing the display panel
Prerequisites
NOTE: This procedure is not applicable to computers shipped with a WWAN configuration.
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the WLAN card.
5. Remove the display assembly.
6. Remove the display bezel.
About this task
The following image indicates the location of display panel and provides a visual representation of the removal procedure.
Removing and installing components
49
To Next Page
Loading...
