Replacing the camera
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Connect the camera cable to the camera module.
2 Using the alignment post, adhere the camera to the display-panel assembly.
Post-requisites
1 Follow the procedure from step 4 to step 9 in "Replacing the display panel".
2 Replace the display assembly.
3 Replace the heat sink.
4 Replace the fan.
5 Replace the wireless card.
6 Replace the base cover.
45
Replacing the camera 75
To Next Page
Loading...
