Dell P76F - Removing the display cable

Removing the display cable
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
3 Remove the fan.
4 Remove the heat sink.
5 Remove the display assembly.
6 Follow the procedure from step 1 to step 6 in "Removing the display panel".
7 Remove the camera.
Procedure
1 Peel the tape that secures the camera cable to the display panel.
2 Open the latch and disconnect the camera cable from the connector on the display panel.
3 Peel the tape that secures the touchscreen-board cable to the display panel.
4 Open the latch and disconnect the touchscreen-board cable from the connector on the display panel.
5 Peel o the camera cable and touchscreen-board cable from the display panel.
6 Peel the tape that secures the display cable to the display panel.
7 Open the latch and disconnect the display cable from the connector on the display panel.
48
78 Removing the display cable