Dell PowerConnect 2824 - Page 138

138 Dell PowerConnect 28xx Systems User Guide
Attaching a Port to a Multicast Router or Switch
1 Open Bridge Multicast Forward All page.
2 Define the VLAN ID field.
3 Select a port in the Ports table, and assign the port a value.
4 Click Apply Changes .
The port is attached to the Multicast router or switch.
Attaching a LAG to a Multicast Router or Switch
1 Open Bridge Multicast Forward All page.
2 Define the VLAN ID field.
3 Select a port in the LAGs table, and assign the LAG a value.
4 Click Apply Changes .
The LAG is attached to the Multicast router or switch.