Dell PowerConnect 2824 User Manual

Dell PowerConnect 28xx Systems User Guide 63
Defining Device IP Addresses
The IP Addressing page contains a link to the IP Interface Parameters page that is used to assign the
device IP address, subnet mask and default gateway, and for enabling or disabling DHCP.
To open the IP Addressing page, click System
 IP Addressing in the tree view.
Defining IP Interface Parameters
To open the IP Interface Parameters page, click System IP Addressing  IP Interface Parameters in
the tree view.
Figure 6-6. IP Interface Parameters
• DHCP — The DHCP client can be enabled to acquire the network configuration dynamically. The
DHCP default value is Disable. This field enables the DHCP client.
•
IP Address — Specifies the IP Address currently assigned to the device.
•
Subnet Mask — Specifies the subnet mask of the IP Address, currently assigned to the device.
•
Default Gateway — Specifies the Default Gateway Address, currently assigned to the device.
Setting static IP Interface parameters:
1 Open the IP Interface Parameters page .
2 Set the IP Address , Subnet Mask and Default Gateway .
3 Click Apply Changes .
The static interface parameters are set and the device is updated.

Dell PowerConnect 2824 Specifications

General

Throughput	35.6 Mpps
MAC address table	8000 entries
Jumbo frames support	Yes
Maximum data transfer rate	1 Gbit/s
Supported data transfer rates	10/100/1000 Mbps
10G support	No
Number of VLANs	64
Networking standards	IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1v, IEEE 802.1W, IEEE 802.1X, IEEE 802.3ac, IEEE 802.3ad, IEEE 802.3x
Dimensions (WxDxH)	330 x 230.5 x 42 mm
Power requirements	100 V
Networking features	Gigabit Ethernet
Connectivity technology	Wired
Dimensions (W x D x H) (imperial)	13 x 9.1 x 1.65 \
DHCP features	DHCP server, DHCP client
Switch type	Unmanaged
Switch layer	-
Data link protocols	Ethernet
Supported network protocols	IGMPv2, GARP, GVRP, GMP, IPv6
Power connector	DC-in jack
SFP/SFP+ slots quantity	2
Basic switching RJ-45 Ethernet ports quantity	24
Product color	Black
Input current	1 A
Heat dissipation	95.5 BTU/h
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 45 °C
Storage relative humidity (H-H)	10 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Weight	2500 g