Dell PowerConnect 2824 - Page 140

140 Dell PowerConnect 28xx Systems User Guide
Enabling IGMP Snooping on the Device
1 Open the IGMP Snooping page.
2 Select the VLAN ID for the device on which IGMP snooping needs to be enabled.
3 Select Enable in the IGMP Snooping Status field.
4 Complete the fields on the page.
5 Click Apply Changes .
IGMP snooping is enabled on the device.
Displaying the IGMP Snooping Table
1 Open the IGMP Snooping .
2 Click Show All .
The
IGMP Snooping Table opens.
Figure 7-31. IGMP Snooping Table