Dell PowerConnect 2824 - Page 98

98 Dell PowerConnect 28xx Systems User Guide
• Trap Frequency (1-1000000) (Sec) — Defines the time period by which traps are sent to the host. The
Trap Frequency (1-1000000) field can be defined only if the Multiple Hosts field is defined as
Disable . The default is 10 seconds.
•
Status — The host status. The possible field values are:
–
Unauthorized — Clients (supplicants) have full port access.
–
Authorized — Cents (supplicants) have limited port access.
•
Number of Violations — The number of packets that arrived on the interface in single-host mode,
from a host whose MAC address is not the client (supplicant) MAC address.
Displaying the Multiple Hosts Table
1 Open the Multiple Hosts page.
2 Click Show All .
The
Multiple Hosts Table opens:
Figure 7-4. Multiple Hosts Table