Dell PowerEdge M630p - Page 35

Option Description
System
Manufacturer
Specifies the name of the system manufacturer.
System
Manufacturer
Contact
Information
Specifies the contact information of the system manufacturer.
System CPLD
Version
Specifies the current version of the system complex programmable logic device (CPLD) firmware.
UEFI Compliance
Version
Specifies the UEFI compliance level of the system firmware.
Related References
System Information on page 34
System Information details on page 34
Related tasks
Viewing System Information on page 34
Memory Settings
You can use the Memory Settings screen to view all the memory settings and enable or disable specific memory functions, such as
memory testing and node interleaving.
Related References
Memory Settings details on page 36
System BIOS on page 25
Related tasks
Viewing Memory Settings on page 35
Viewing Memory Settings
To view the Memory Settings screen, perform the following steps:
Steps
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE:
If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Memory Settings.
Related References
Memory Settings on page 35
Memory Settings details on page 36
Pre-operating system management applications
35