PowerEdge R410 Technical Guidebook
7
Dell
4 Mechanical
4.1 Chassis Description
The PowerEdge R410 chassis design provides customers low-cost compute power with some
hardware redundancy ability. It is a new chassis design for two incoming chassis offering cabled hard
drive with LED module, and high-availability features such as hot-plug hard drives and LCD module.
Features include four 3.5” SATA or SAS hard drives (cabled or hot-swap), power supply (non-
redundant or redundant), dual Gigabit LOMs without TOE acceleration, four DIMM slots support each
CPU, TPM, one riser card for optional PCIe expansion card, optional iDRAC6 Enterprise and iDRAC6
Express card mounted on planar without PCI slot occupied, and support 11G slim static and slim sliding
rails.
4.2 Dimensions and Weight
Table 3. R410 Dimensions
Dimension (HxWxD)
(without ear, without
bezel)
43.0 x 434.0 x 627.1 (mm)
1.69 x 17.09 x 24.69 (in)
Max Weight 15.9Kg/35.02lbs
Table 4. Detailed Dimensions
Dimensions (mm)
Development
Name
Model
Number
Xa Xb Y
Za
with
bezel
Za
without
bezel
Zb* Zc
Max Sys
Weight
Chassis
U
The PowerEdge
R410
PE R410 482.4 434.0 43.0 35.0 20.1 606.0 641.9
15.9Kg/35.02lbs
1U
Note
Zb goes to the nominal rear wall external surface where the motherboard I/O connectors reside.
Figure 1. R410 Top and Side Measurement Key
To Next Page
Loading...
