Dell PowerEdge T610 - Back Panel View and Features; Power Supply Indicators; Table 4. Power Supply Status; Figure 3. Back View

Dell
PowerEdge T610 Technical Guide 15
4.4 Back Panel View and Features
Figure 3 shows the back view of the PowerEdge T610.
Back View Figure 3.
See the Back-Panel Features and Indicators section in the About Your System chapter of the
PowerEdge T610 Hardware Owner’s Manual on Support.Dell.com for more information.
4.5 Power Supply Indicators
The PowerEdge T610 redundant power supplies have one status bi-color LED: green for AC power
present and amber for a fault as detailed in Table 4.
Power Supply Status Table 4.
LED
Power Supply Status
AC Power is not present
AC Power is present
Fault of any kind is detected
DC Power is applied to the system
↔
Redundant power supply mismatch
(when hot-plugged/swapped)