Dell PowerEdge T610 - Power Consumption Testing; Maximum Input Amps; Energy Smart Enablement

Dell
PowerEdge T610 Technical Guide 23
Airborne contaminant level
Class G1 or lower as defined by ISA-S71.04-1985 (G1 maximum corrosive contaminant levels measured at ≤ 50%
relative humidity)
For additional information about environmental measurements for specific system configurations, see
Dell.com/environmental_datasheets.
5.6 Power Consumption Testing
Feature
Energy Smart Power
Supply
High Output Power Supply
Dimensions
L-206.4mm
1
x W-67.5mm x H-76.5mm
Status Indicators
1 x bi-color Light Emitting Diode
Integrated Fans
1 x 60mm
Fixed Input Plug
IEC-C14
AC Cord Rating
15 Amps @ 120 VAC, 10 Amps @ 240 VAC
Input Voltage
90 – 264VAC
Auto-ranging
Yes
Line Frequency
47 – 63Hz
Maximum Inrush Current
55 Amps per supply for 10ms or less
Hot-Swap Capability
Yes
Output Power
570 Watts
870 Watts
Maximum Heat Dissipation
1944.9 BTU per hour
2968.6 BTU per hour
Efficiency (20% - 100%
Load)
86.9 – 90.5% @ 115 VAC
88 – 92% @ 230 VAC
85 – 88% @ 115 VAC
87 – 90% @ 230 VAC
1
Does not include the power supply handle or ejection tab
5.7 Maximum Input Amps
Maximum input current (high-output power supply):
• 12A @ 90 VAC
• 6A @ 180 VAC
Maximum input current (Energy Smart power supply):
• 7.8A @ 90 VAC
• 3.9A @ 180 VAC
5.8 Energy Smart Enablement
The 11G family of PowerEdge servers implements aspects of the Dell Energy Smart strategy. This
strategy offers the following: