Dell PowerEdge T610 - NIC Indicators; Internal Chassis Views; Rails and Cable Management; Figure 4. Internal Chassis View

Dell
PowerEdge T610 Technical Guide 16
See the Power Indicator Codes section in the About Your System chapter of the PowerEdge T610
Hardware Owner’s Manual on Support.Dell.com for more information.
4.6 NIC Indicators
See the NIC Indicator Codes section in the About Your System chapter of the PowerEdge T610
Hardware Owner’s Manual on Support.Dell.com for more information.
4.7 Internal Chassis Views
Figure 4 shows the internal view of the PowerEdge T610 server.
Internal Chassis View Figure 4.
4.8 Rails and Cable Management
ReadyRails
TM
Sliding Rails for 4-post racks support the following:
• Toolless installation in 19" EIA-310-E compliant square or unthreaded round hole 4-post racks
including all generations of Dell racks
• Tooled installation in 19" EIA-310-E compliant threaded hole 4-post racks (requires the 2U
Threaded Rack Adapter Brackets Kit)
• Full extension of the system out of the rack to allow serviceability of key internal components
• Optional cable management arm (CMA)
See section 14 for more details.