PowerEdge T610 Technical Guide 41
Mixed SATA + SAS
Min 2xSAS + 1xSATA
2.5” = Max 2xSAS +
6xSATA
3.5” = Max 2xSAS +
6xSATA
Integrated SAS/SATA No
RAID (SAS 6/iR, PERC H200)
Integrated SAS/SATA RAID
1/RAID 1 (SAS 6/iR, PERC
6/i, PERC H200, PERC H700)
Integrated SAS/SATA RAID
1/RAID 5 (PERC 6/i, PERC
H700)
Mixed SSD + SAS
Min 2xSSD + 1xSAS
2.5” = Max 2xSSD +
6xSAS
Integrated SSD/SAS RAID
1/RAID 5 (PERC 6/i, PERC
H700)
12.4 Storage Controllers
12.4.1 SAS 6/iR
The T610 internal SAS 6/iR HBA is an expansion card that installs into the dedicated internal storage
slot. It incorporates two four-channel SAS IOCs for connection to SAS or SATA hard disk drives. It is
designed in a form factor that allows the same card to be used in the PowerEdge T610 and
PowerEdge T610.
12.4.2 PERC 6/i
If you want an internal RAID solution, select the PERC 6/i or PERC H700. The PERC 6/i uses the LSI
1078 ROC (RAID on Chip) processor with a PCI Express host interface and DDR2 memory, and it installs
into the dedicated internal storage slot. A battery is also available for backup.
12.4.3 PERC H200
The H200 SAS HBA is an expansion card that installs into the dedicated internal storage slot. It
incorporates two four-channel 6 Gb/s SAS IOCs for connection to SAS hard disk drives. It is designed
in a form factor that allows the same card to be used in other 11G 2U rack-form factor platforms.