Dell PowerEdge T610 - Processor Configurations; Single Processor Configuration; Processor Power Voltage Regulation Modules (EVRD 11.1); Processor Installation

Dell
PowerEdge T610 Technical Guide 27
Model
Speed
Power
Cache
Cores
QPI Speed
E5530
2.40GHz
80W
8M
4
5.86GT/s
L5520
2.26GHz
60W
8M
4
5.86GT/s
E5507
2.26GHz
80W
4M
4
4.8GT/s
E5506
2.13GHz
80W
4M
4
4.8GT/s
E5503
2.00GHz
80W
4M
2
4.8GT/s
6.4 Processor Configurations
6.4.1 Single Processor Configuration
The PowerEdge T610 is designed so that a single processor placed in the CPU1 socket functions
normally. The system will halt during power-on self-test (POST) if a single processor is placed in the
CPU2 socket. If using a single processor, the T610 requires a heatsink blank in the CPU2 socket for
thermal reasons.
6.4.2 Processor Power Voltage Regulation Modules (EVRD 11.1)
Voltage regulation to the Intel Xeon processor 5500 and 5600 series 2S is provided by EVRD
(Enterprise Voltage Regulator-Down). EVRDs are embedded on the planar. Processor core voltage is
not shared between processors. EVRDs support static phase shedding and power management via the
PMBus.
6.5 Processor Installation
Refer to the Processors section in the Installing System Components chapter of the Dell PowerEdge
T610 Systems Hardware Owner’s Manual on Support.dell.com for processor installation and removal
instructions.