Dell PowerEdge T610 - Using the System Setup Program and UEFI Boot Manager; Choosing the System Boot Mode

Dell
PowerEdge T610 Technical Guide 57
LOM (LAN [Network Interface] on
Motherboard) Memory
Details
Size:
4Mb (1MB)
Type: [Flash PROM, EEPROM]:
Flash
Can user programs or operating system write
data to it during normal operation?
Yes, under software control.
Purpose? [boot code]
Contains LOM boot code and configuration data
How is data input to this memory?
Requires vendor provided firmware file and
loader program used during factory assembly or
possible field update. A system loaded with
arbitrary data in firmware memory would not
operate.
How is this memory write protected?
Software control
Server System FRU
Details
Size:
4KB
Type: [Flash PROM, EEPROM]:
SEEPROM
Can user programs or operating system write
data to it during normal operation?
No
Purpose? [boot code]
Store System FRU
How is data input to this memory?
BMC controller write
How is this memory write protected?
Not write protected
Power Supply FRU
Details
Size:
256 bytes
Type: [Flash PROM, EEPROM]:
SEEPROM
Can user programs or operating system write
data to it during normal operation?
No
Purpose? [boot code]
Store power supply information
How is data input to this memory?
Programmed by the power supply manufacturer
How is this memory write protected?
Not write protected
TPM (Trusted Platform Module; for boards
shipped outside of China. Boards sold to
destinations in China have S-TPM.)
Details
Size:
Unspecified size of user ROM, RAM, EEPROM;
128 bytes of OTP memory included
Type: [Flash PROM, EEPROM]:
ROM, RAM, EEPROM