258 Management: Installing Array Components
Figure 16-11. Removing and Installing a Power Supply/Cooling Fan Module
Installing a Power Supply/Cooling Fan Module
CAUTION: Many repairs may only be done by a certified service technician. You must
only perform troubleshooting and simple repairs as authorized in your product
documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty.
Read and follow the safety instructions that came with the product.
1
Slide the power supply/cooling fan module into the chassis until it is fully
seated and the release tab clicks into place. See Figure 16-11.
2
Connect the power cable to the power supply/cooling fan module and plug
the cable into a power outlet.
3
Secure the power cable using the strap. See Figure 16-12.
1 release tab 2 power supply
3 power supply handle
book.book Page 258 Friday, September 23, 2011 2:46 PM
To Next Page
Loading...
