Management: Installing Array Components 261
Figure 16-14. Removing and Installing the Control Panel-PowerVault MD3620f
Installing the Control Panel
1
Align the control panel with the slot on the array.
2
Slide the control panel into the array until:
– The release tab clicks into place in
PowerVault MD3600f
.
See Figure 16-13.
– The release pin clicks into place in
PowerVault MD3620f
.
See Figure 16-14.
3
Replace the hard drives in their respective slots. See "Installing a Hard
Drive" on page 246.
4
Connect all the power cables to the array.
5
Turn on the array and the host server.
1 release pin 2 control panel
book.book Page 261 Friday, September 23, 2011 2:46 PM
To Next Page
Loading...
