Installing the HDD
1 Insert the HDD into the 3.5" bracket with the connector end of the hard drive towards the back of the HDD bracket.
2 Slide the HDD bracket back into the hard drive bay.
3 Install the following:
a HDD bracket
b HDD bezel
c side cover
4 Follow the procedure in After working inside your computer
Slim Optical Disk Drive
Removing the slim ODD
1 Follow the procedure in Before working inside the computer.
2 Remove the side cover.
3 To remove the slim ODD:
a Remove the screw [1] that secures the slim ODD and push the slim ODD [2] out of the chassis.
20
Removing and installing components
To Next Page
Loading...
