Dell Precision 7820 - Installing Front Input and Output Bezel; 5.25 Inch ODD Bracket; Removing the 5.25 ODD Bracket

Installing front input and output bezel
1 Hold the input and output(I/O) bezel and ensure that the hooks on the bezel snap into the notches on the system.
2 Press the retention tabs and secure them to the chassis.
3 Install the :
a front bezel
b side cover
4 Follow the procedure in After working inside your computer.
5.25 inch ODD bracket
Removing the 5.25 ODD bracket
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a side cover
b front bezel
3 To remove the ODD bracket:
a Remove the ODD ller from the chassis.
24
Removing and installing components