Processor heat sink module
Removing the processor heat sink module
1 Follow the procedure in Before working inside your computer.
NOTE: Ensure that you have Torx 30 screwdriver to remove the processor heat sink module (PHM).
2
Remove the:
a side cover
b air shroud
3 To remove the heat sink:
a Remove the four heat sink screws [1], in the diagonal order (4, 3, 2, 1).
b Lift the heat sink away from the CPU slot on the system board.
CAUTION: CPU will be removed with the heat sink.
50 Removing and installing components
To Next Page
Loading...
