Installing the GPU
1 Align and place the GPU to the PCIe slot on the system board.
2 Press it down so that it is securely seated on the slot.
3 Connect the power cable to the GPU.
4 Lock both the blue clips forward on the ller bracket to secure the GPU to the system board.
5 Install the side cover.
6 Follow the procedure in After working inside your computer.
Coin cell battery
Removing the coin cell battery
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a side cover
b graphical processing unit(GPU)
3 To remove the coin cell battery:
a Press the release latch [1] away from the battery to allow the battery to pop-up from the socket [2].
38
Removing and installing components
To Next Page
Loading...
