Installing the rear system fan
1 Insert the fan assembly on one side to align it with the screw tab on the PSU bracket.
2 Press the assembly on the other side to align it with the screw tab on the PCI bracket.
3 Tighten the two screws to secure it with the system.
4 Connect the two fan cables to the system board.
5 Install the:
a processor heat sink module(PHM)
b side cover
6 Follow the procedure in After working inside your computer.
Front system fan
Removing the front system fan
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a side cover
b front bezel
c PCIe holder
Removing and installing components
47
To Next Page
Loading...
