Installing the 5.25 ODD bay
1 Place the ODD bracket into the system slot.
2 Replace the (6-32 X 6.0mm) screws.
3 Place the ODD ller back into the slot.
4 Install the:
a front bezel
b side cover
5 Follow the procedure in After working inside your computer
Front input and output panel
Removing front input and output panel
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a side cover
b front bezel
c front input and output bezel
d 5.25 inch ODD bracket
Removing and installing components
27
To Next Page
Loading...
